Mi wifi range extender pro

For sale by: security bot, 10 Dec 2025 11:49 pm Location: Chittagong, Chattogram

Tk 1,500

Negotiable

Shere This Ad:

## ✅ What it is & what it does

* The Mi Wi-Fi Range Extender Pro is a small “repeater/extender” device — it doesn’t replace your router, but **boosts & extends** your existing Wi-Fi signal so you get coverage in weak-signal or “dead-zone” areas (e.g. far rooms, balcony, bathroom). ([Mi Singapore][1])
* You plug it in near your current router for initial setup (via the Mi Home app or QR code), wait for the light indicator, then relocate it somewhere between router and the weak-signal zone. After that you don’t need to reconfigure it. ([Mi Singapore][1])
* Once configured, it rebroadcasts (re-emits) your Wi-Fi signal — allowing multiple devices (smartphones, laptops, TVs, tablets, game consoles, etc.) to connect and get a stronger, more stable signal. ([Anagu][2])

## 📶 Key Features & Performance

* **Dual external antennas (2×2)** — provides improved range and signal stability vs a basic internal-antenna extender. ([Mi Singapore][3])
* **Speed up to 300 Mbps** (on 2.4 GHz, IEEE 802.11b/g/n standard) — good enough for browsing, streaming, video calls, and moderate gaming. ([Mi Singapore][3])
* **Compatible with most routers** — you can use it with routers from other brands (not just Xiaomi). ([ePrice][4])
* **Supports multiple devices** — can support many connected devices at once (some listings say up to 16 devices, others up to 64 — but real-world use typically ~16 simultaneous devices for stable performance). ([ShopXup][5])
* **Secure Wi-Fi encryption supported** — WPA-PSK / WPA2-PSK for safe connections. ([Mi Singapore][3])
* **Compact & low-power** — physical size ~ 80 × 54 × 70 mm; consumes low power (~3.6 W) so it can run 24/7 without much energy cost. ([Mi Singapore][3])

## 🔧 Technical Specs (R03 model)

| Spec | Detail |
| -------------------------------- | ----------------------------------------------------- |
| Wireless standard | IEEE 802.11 b/g/n (2.4 GHz) ([Mi Singapore][3]) |
| Max data rate | Up to 300 Mbps ([Mi Singapore][3]) |
| Antennas | 2 external antennas (2×2 MIMO) ([Mi Singapore][3]) |
| Processor | MT7628K 580 MHz ([Mi Singapore][3]) |
| Memory | 2 MB ROM / 8 MB RAM ([Mi Singapore][3]) |
| Security | WPA-PSK / WPA2-PSK ([Mi Singapore][3]) |
| Power input | AC 100–240 V, 0.35 A ([Mi Singapore][3]) |
| Power consumption | ~3.57 W ([Mi Singapore][3]) |
| Dimensions | 80 × 54 × 70 mm ([Mi Singapore][3]) |
| Operating temperature / humidity | 0–40 °C; 10–90% RH non-condensing ([Mi Singapore][3]) |

## ✅ What it’s good for & what to expect

* It’s best if you just want to **extend** your existing Wi-Fi coverage without buying a separate router or re-wiring.
* Good for **small to medium homes/flats**, guest rooms, or areas where the router’s signal doesn’t reach.
* Because it uses 2.4 GHz and standard Wi-Fi protocols, you’ll get **broad compatibility** with older and newer devices.
* Easy to set up — basically plug-in + Mi Home app + QR scan — and then "set and forget."

Similar ads